Got a little problem with all liquid pipes and reservoirs in RotaryCraft. Is it really glitchy or it's just me doing things wrong?
I've got a grinder setup and it's working on it's own perfectly, but when I've got pipes all over my base going to 4 or more gearboxes and a reservoir it's not filling anything. I thought that one grinder might be not enough but that's not the case.
I've got quite a long line of lubricant hose and it is not filling the gearbox at the end, but when I've put a reservoir few blocks before it grabbed 3 or 4 buckets straight away.
Are there any length limits for pipes in RotaryCraft? Does it have to be closer to the grinder or a number of 'exits' have to be smaller? Does the pressure have to be bigger or something? My pipes are going few blocks higher that pumps and grinders and then going down again. Did any of you had similar problems?
I have similar problems with lava and water. One thing I have found is that reservoirs are buggy when the are placed as buffers (pipe going in from the side and another going out at the bottom).
BTW I've solved the problem with shaft core charging slowly. Now it's working properly....but I need more lubricant for the gearboxes!
Thanks for your time