4 replies to this topic

[rawveggie]

Hello,

 

I am having a problem converting power from a Hardened Energy Cell (RF) into LV EU for a Recycler and an Extractor. The power conversion seems to work fine for a few hours but then it just stops. The energy cell has power and the Energy Bridge shows full charge but no power is flowing; meaning the Recycler and the Extractor run out of power and then don't get charged up again.

 

My exact setup goes like this: Aqueous Accumulator -> Steam Dynamo (with fuel) -> Leadstone Energy Conduit -> Hardened Energy Cell (charged to over 100k) -> RF Consumer -> Energy Bridge -> EU LV Producer -> Insulated wire (tried both tin and gold) -> Recycler & Extractor

 

At first it was working fine, then I had to rearrange my machines and it stopped working. I rearranged once again (just changing the layout with the same devices) and it started working again but then stopped again.

 

Things I have tried:

Double and Triple checking the configuration of the Energy Cell

Removing and replacing the Energy Cell

Removing and replacing the Steam Dynamo 

Removing and replacing both the Recycler and the Extractor (I have also tried just doing one at a time with no luck)

 

It's pretty frustrating so I am looking for any help.

 

Thanks!

[timrem]

Just one question: Is it chunkloaded? Another user was experiencing buggy behaviour with Power Converters, and a simple chunkloader fixed it.

[DiamondDoctor]

Just one question: Is it chunkloaded? Another user was experiencing buggy behaviour with Power Converters, and a simple chunkloader fixed it.

[rawveggie]

Just one question: Is it chunkloaded? Another user was experiencing buggy behaviour with Power Converters, and a simple chunkloader fixed it.

Thanks for the response timrem. The PCs are located in the main base and I have some friends running around but it is very possible that they all just happened to be out of that chunk a few times. I'll try it and let you know.

[rawveggie]

That worked. Thank you much!